样槽组装完整后，按照设计图纸各项要求进行检查，主要检查尺寸误差是否达到要求、摇篮托架和底板焊接完后平整度，焊接变形控制是否满足要求、电解槽的高度、宽度、长度在允许公差内.

After assembling the sample bath, examination shall be carried in accordance with the specifications in the design drawings, especially examing the following issues: whether the dimensions complying with the requirements; the flatness of the weldings of swung basket's bracket and bottom plane; whether the welding distortion complying with the controlled requirements; and whether the H/W/L of electrobath satisfying the permissible tolerances.